Weiser deadbolt installation

With customizable entry codes you can provide temporary access to contractors, babysitters and disable them with ease. Electronic locks provide great security and convenience. Smart locks can wirelessly communicate with your smart phone, tablet or internet connected devices. Access your lock from anywhere and never worry about if you have forgotten to lock your door again.

Weiser's Key Control Deadbolt, featuring SmartKey Re-key Technology, is a revolutionary cost and time-saving alternative to master keying. Re-keying a traditional master key system is labour intensive and costly. With the first and only two-cylinder Key Control Deadbolt, either cylinder can be re-keyed in seconds, without removing the lock from the door. Home Products Deadbolts. Downtown deadbolt featuring SmartKey in satin nickel with Halifax lever in satin nickel leading into a living room.

Weiser Deadbolts Maximum Security. Uncompromising Strength. Cutting Edge Design. Mechanical Deadbolts Mechanical. Electronic Deadbolts Electronic. Smart Deadbolts Electronic. Why is a SmartKey lock better than a regular lock? It protects against common break-in methods.

Push the torque blade through the center hole in the mounting plate and send the cable through the bottom hole. Secure the mounting plate with the supplied screws. Remove the battery cover. Load 4 AA batteries into the interior assembly. For best results, use new, non-rechargeable Alkaline batteries only. Press and hold the Reset button on the interior assembly for 5 seconds, until you hear 3 long beeps.

Align the colored edges of the connectors and ensure a tight cable connection. Make sure the torque blade is still in the horizontal position and install the interior assembly. Test the turnpiece for smooth rotation. Secure the interior assembly with the supplied screws. Reinstall battery cover and make sure the latch is still in the unlocked position.

This is your default Mastercode. Note: Each button on the keypad represents two numbers. You only need to push the button once to get either number. The latch bolt will extend and retract. The lock will beep and the keypad will turn green or red. Press the Lock button. The latch bolt will extend to lock. Enter the default User Code , then press the Lock button. The door will unlock. See page 4. If needed, re-key the lock to work with your existing key.

See the supplied SmartKey Re-Key instructions for more information. Move swiftly during programming. If no digit is pressed for 10 seconds, the system will time out and you will need to restart the procedure. For a new installation, this will delete the default User Code For subsequent instances, this will delete all User Codes in the lock.

Now the lock can only be operated by the key and turnpiece until a new User Code is added in step B. A total of 6 User Codes and a temporary one-time User Code may be programmed. Do not program a User Code that is the same as your Mastercode. The Mastercode will not unlock your door. It is an added security feature that is used to set up all functions.

The default Mastercode is It is recommended that you change it to a code of your own. This feature is off by default.