Maple 10 installation vista

Maple 10 is now installed. You need to configure the license manager prior to using Maple If the license server is to be run in Windows, follow the instructions in:. Check the bit Linux System Requirements. Macintosh Network Installation To install Maple 10 on your Macintosh operating system, read and complete the following tasks.

Silent Windows Installation On Windows, it is possible to install using a command-line or silent mode option. Close all programs, particularly Microsoft Excel and any previous release of Maple. You are ready to use Maple Windows Network Silent Installation To install Maple 10 on your Windows operating system, read and complete the following tasks. License files for earlier versions of Maple do not work with Maple To obtain your license file, you must use the Maple activation program.

Ensure that you can connect to the Internet as activation requires an Internet connection and follow the steps below if your computer does not have an Internet connection, please contact Customer Service. Macintosh Open a Terminal window. To run this in console mode, use the -console option. If you are using more than one license manager Activating multiple licenses for multiple license managers will require separate activations.

Windows Network Licensing Select one of the following licensing schemes. To set up and start the license manager daemons on a Windows Network Server:. In the Config Services property sheet, enter or browse for the following:. This option is not needed to start the daemons under Windows 98 or Windows ME; therefore, it is not available for selection on these platforms. To set the daemons to start at boot time recommended , select the Start Server at Power Up check box.

Enter a name for your service and click Save Service. When prompted to save the service, click Yes. In that property sheet, click Start Server to start the license manager daemons. Go to the directory of the FLEX lm utilities that are currently being used. Double-click lmtools. Click the Config Services tab. From the Server Name list, select the service currently being used. Start the license manger daemons. Go to the location of the FLEX lm utilities that are currently being used.

For Maple 9. To start the license manager, enter the following command:. By default,. Daemons Run on Startup. On bit Linux platforms, you must enter the following command before starting the license manager daemon:.

How to Start Maple Maple 10 provides users with two worksheet interfaces graphical user interfaces and a command-line text-based interface. By default, worksheets open in the enhanced and more modern Standard Worksheet.

In Windows, you can change the Maple worksheet file association using the Worksheet File Association Selector application from the Tools folder of the Maple 10 Start menu.

Document mode allows you to start solving problems right away, without needing syntax or Maple commands. You can freely combine text and math to produce presentation-quality mathematical documents. Double-click the Maple 10 shortcut icon from the desktop, if available, or select the Maple 10 program from the Start menu. If you installed Maple in the default location, from the Start menu, select Programs , Maple 10 , then Maple Double-click the Maple 10 icon in the Application folder.

Double-click the Classic Worksheet Maple 10 shortcut icon from the desktop, if available, or select the Classic Worksheet Maple 10 program from the Start menu. Shared Kernel Mode In the Standard Worksheet interface, all worksheets have independent kernels, that is, definitions and packages available in one worksheet are not available in other worksheets in that Maple session.

To start Maple 10 for Windows in Shared Kernel mode:. Alternatively, you can change this setting from the Options screen of the Tools menu item.

This setting will take place the next time you start Maple. To start Maple 10 for Macintosh in Shared Kernel mode:. Change this setting from the Options screen of the Tools menu item. Maple Calculator On Windows, Maple 10 has a convenient graphing calculator interface. To start the Maple Calculator:. Double-click the Maple Calculator shortcut icon from the desktop, if available, or select the Maple Calculator program from the Start menu.

If you installed Maple in the default location, from the Start menu, select Programs , Maple 10 , and then Maple Calculator. Return to Top of the Document.

In Windows, you can run Maple in one of two user profile modes. Use Single User Mode when only one person is using Maple. Use Multiple User Mode if more than one person is using a single copy of Maple.

Multiple User Mode enables all licensed users to log in and run Maple using their own default settings. To change the working directory, follow these instructions. Create a new shortcut for Maple. Right-click the shortcut icon and select Properties.

Change the Start in field. The directory listed in the Start in field is the working directory when you start Maple using the shortcut key. How to change launch options for Standard Interface on Windows The Standard Worksheet interface reads the ini file bin. How to Execute Commands Automatically You can configure Maple to automatically execute a series of commands on start up.

Delete the directory in which Watcom was installed. Some interface features are not available in the Classic Worksheet. Enterprise 2. X11 R6. SuSe Enterprise 9. Share via:. Share via e-mail:.

From: To: Custom Message optional :. Share on Facebook:. You must be logged into your Facebook account in order to share via Facebook. Login to Facebook. Share via GooglePlus:. Share via Twitter:. Login to Twitter. Your message was sent! Send another message.

Please log-in to your MaplePrimes account. If your system has less than the recommended amount of physical memory, it is suggested that you use the Classic Worksheet version of Maple Standard Worksheet Maple. Use the one best suited to your needs. Worksheet mode is most familiar to users of previous versions of Maple.

Enter commands on an input prompt to get results and you can still format your worksheets into presentation-quality documents using all of the new features of Maple Classic Worksheet Maple. Command-line Maple. The Command-line version of Maple has a text-based user interface.

While allowing complete access to the mathematical engine, the Command-line version of Maple requires less system resources. For more information, refer to the Command-line Maple section of the readme. Shared Kernel Mode. In the Standard Worksheet interface, all worksheets have independent kernels, that is, definitions and packages available in one worksheet are not available in other worksheets in that Maple session. The Shared Kernel version of Maple allows all worksheets to share the definitions.

For more information, refer to? Excel Add-in. For more information, refer to the? Excel help page in the Maple Help system. Maple Calculator. How to Customize Maple. How to Change the User Mode or Directory. How to Change the Working Directory. In the Windows version of Maple, you can change the working directory by creating a shortcut to Maple 10 and assigning it a different directory.

At start up, Maple searches the current working directory for a custom initialization file. It stops searching when it finds the file. For more information, see How to Execute Commands Automatically. How to change launch options for Standard Interface on Windows. The Standard Worksheet interface reads the ini file bin. The directives recognized are as follows is allowed to specify a comment.

How to Execute Commands Automatically. You can configure Maple to automatically execute a series of commands on start up. This approach is especially useful for setting global variables, such as Digits and Order. To do this, create a Maple initialization file. OpenWatcom Windows only.

Maple 10 includes the OpenWatcom C compiler. This compiler is used for the Maple compiler feature, which allows you to compile some types of user-written Maple routines to speed up the performance of your code.

To use this feature, you must install the OpenWatcom C compiler when you install Maple During installation, you will have the opportunity to change this default location. To remove the OpenWatcom C compiler after installation, follow these steps. Appendix: System Requirements. Windows System Requirements. For configurations with minimal system requirements, the Classic Worksheet interface is recommended.

Macintosh Minimum System Requirements. Debug log contains the following:. To workaround this problem, you must create and execute the following script:. This resets the file descriptor limit for lmgrd , which resolves the problem. Issue: Starting Standard Maple on Windows computer and dialog displays "connecting Resolution: This is likely due to an interaction between Maple and a personal firewall installed on the same machine. The firewall can interfere with establishing an internal network connection on the local computer.

The connection required is to "localhost" on the computer and not a connection to an external source. This problem occurs also with single user installations of Maple.

Configure your firewall to grant full permissions to the following Maple files:. Issue: Maple 10 is installed without problems on a Windows computer that has more than 1 GB of memory, but the Standard worksheet will not start. Maple 10 splash screen appears but program does not launch.

Resolution: When Maple starts, it sets the maximum amount of memory Java may potentially use based on the amount of physical memory in the machine. If that maximum is too high, Java refuses to start. Therefore, on machines with a lot of physical memory, Maple may not start either. To decrease the amount of memory used by Java on Windows you can edit the file launch. This change does not affect the amount of memory available to non-Java components of Maple, including the math engine, which will still take advantage of the machine's internal memory when solving large problems.

If this does not work, experiment with the size value to find one that works for you. If you continue to have difficulties, contact Maplesoft Technical Support.

Issue: Download Maple 10 for Macintosh but when double-clicking the file, nothing happens. Resolution: Maple 10 for Macintosh is downloaded from the Maple Web store in a compressed format.

To extract the Maple 10 installer file, you must download and install Stuffit Expander for Macintosh free from Apple. Issue: Trying to install Maple 10 on Windows Server and receiving the error "The instructions at "0xd0" referenced memory at 0x Memory could not be written" or the installer quits with no error message. Resolution: This behaviour is likely caused by Data Execution Prevention that is automatically installed and turned on in Windows Server when SP1 is installed.

Each platform's install files are available only from that platform. This document contains all the information you require for a standard Maple installation. All other brand names or product names are trademarks or registered trademarks of their respective companies.

Additional requirements are given below. Available on Windows and Linux. The optional Maple connectivity feature works with Maple System Requirements. Maple Maple Add-ons Maple Flow NET Framework installed. Back to top. Some functionality requires an internet connection.